To create a cut, use the Swept Cut tool to move a profile along a path. The profile can contain one or more closed contours. To create a solid, use the Swept Boss tool to move a profile along a path. At this stage either the face or the edge of the existing body can be selected for a Profile. Within SOLIDWORKS, a sweep is a tool that creates a solid, a cut or a surface feature by moving a profile along a path. In the PropertyManager, under Profile and Path, Sketch Profile is selected. In this case, Swept Boss/Base is selected from Features toolbar or from Insert > Boss/Base > Sweep. In the following image the edge and face of an existing body can be used to run a sweep. SOLIDWORKS 2018 SP05 To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help. Set the PropertyManager options based on the sweep cut feature. A group of edges or curves selected as a loop using the SelectionManager. Set the PropertyManager options based on the sweep boss/base feature.A single edge or reference geometry curves that contain a smooth, closed loop.
Enhanced selection is supported with Boss, Base, Cut, Surface, and Assembly cut sweep features. LENS Part Revolved Boss/Base Feature 6-5. Chapter 6 - Revolved Boss/Base Features 6-1. SOLIDWORKS Sweep feature enhancementįor the 2017 release the SOLIDWORKS Sweep feature removes the need to convert entities of an existing face for a selection set. You can now select faces, edges, and curves directly from models as sweep profiles. Engineering Graphics with SOLIDWORKS 2017 Introduction. However, if the profile is different to a circle, it needs to be sketched or in the quickest way be converted from the existed edges or faces. In the past, from customer requests, DS SOLIDWORKS added the “Circular Profile” option to make the sweep with only one sketch for path and hence make them quicker. The SOLIDWORKS Sweep feature has been improving over the years unlike Extrude the Sweep feature requires at least two sketches to be selected, namely the Profile and Path. Swept Boss/Base PropertyManager Open a part that has either a closed profile sketch and a sketch path, or a part with a sketch line, edge or curve on the model.
0 kommentar(er)
